Roman ShadesA subheading can go here.
European Roman Shade By Jordan Taylor
The sides of the shade curve upward when the shade is raised. This softens the entire look of the shade as the fabric gathers in random soft folds.
Casual softness with a sense of ease and comfort, the flexibility of this style lends itself to use with all kinds of fabrics. From heavyweight prints and textures to the most lightweight ones, all look wonderful in the relaxed style.
Small tack stitches used to attach the cord rings are visible on the face of the shade. When first installed this style should be pulled up fully and left in place several days to create “pleat memory”.No decorative trim upgrades available.
Minimum width 30 inch W
Maximum width 120 inch W
Minimum length 16 inch L
Maximum length 120 inch L
The following fabrics are not recommended in the European style: Gem,
Neptune, Wilmington, Silk and Shannon
Standard lining included. Upgrade to Thermal Sateen or Blackout lining
Lifting System Upgrades
Continuous Cord Loop (CCL)
2 inch single fold
1/2 inch double fold
Standard pleat size
4 inch pleat folds when shade is raised
Top pleat size
From 41/2 inch to 14 1/2 inch. Multiple shade orders of different heights may not have the same size top pleats
Shades 60 inch W and under have 1 scoop
Shades wider than 60 inch W have 2 scoops
- Vignette® Modern
- Design Studio™
- Fresco Romans
- Shades of Elegance
- Carmel Fabric
- California Style Roman Treatment
- Alustra Vignette® Modern
- Soft Fold Shades by Jordan Taylor
- Plain Roman Shade by Jordan Taylor
- European Roman Shade By Jordan Taylor
- Flat Fold Roman Shade by Jordan Taylor